Wood Oil Finish Sample - Pure | Oil Plus Part A | Quick-Dry, Eco-Friendly Linseed Wood Oil for Indoor Use | Ideal for Sampling Oil Plus 2C & Touch Ups | 20 mL

Beautiful shade of green. Nice and easy to stain. Dries quick to the touch.

We've tested a number of Rubio products and are impressed with all of them. They're foolproof and totally safe for our family. The Monocoat seems bet suited to use on previously unfinished hardwood furniture, and does not work well on plywood. The coverage is pretty good, though I've found it doesn't go quite as far as the manufacturer indicates. Easy to apply with just a standard staining pad - one for application and one for wiping off. Make sure to sand to a smooth finish and you will see sanding marks after application if not sanded well (but this is true of most finishes). It definitely works best when mixed with Part B as it takes a long time to cure otherwise. You can purchase the Part B Accelerator together with the color or purchase smaller quantities of the Part A and Part B separately. It is so so easy to apply, hardly has any smell, and washes off with water. The finish is not glossy at all, but it feels like it really protects the wood. I discovered it specifically when looking for a completely non-toxic, no VOC product to finish a bookshelf in our baby's bedroom. I feel totally confident that it's safe for my family and couldn't be happier with the results. We've used it on both projects that get heavy use and are rarely touched and the finish holds up well under all circumstances. For exterior applications they also have Exterior Hybrid Wood Protector. The Look IPE color in this product seems fairly similar to the Ice Brown in the Monocoat. The Exterior Hybrid Wood Protector is equally awesome and easy. We used it on two unfinished exterior doors and even some interior furniture that gets heavier use (i.e. kitchen table and desk).

I used this on my Audi interior ash trim. All I have to say is that Rubio make great stuff. Fantastic and awesome quality.

This sample was extremely helpful for us to determine if we wanted to use this stain color. The sample size is small, which is more than enough for us to test the color. We ultimately decided to go with another stain color but still with the Rubio brand.

We bought a butcher block from a local home improvement store with the purpose of converting it into a desk and some shelves. We created legs and needed to stain them as close to the color of the butcher block and we found this product. It was a little on the spendy side especially since my husband had to purchase additional products to speed up the curing time but the color match was spot on.

Have been a user and fan of Rubio for several years now. Recently tried this color on black and red oak pieces I built and the results were fantastic in terms of color and finish.

Perhaps one star is unfair since I suppose this product is really great for new raw wood. Maybe without the stain it's also an excellent wax. But I wanted a dark finish and was thrilled that I found a food-safe stain to use (walnut). I followed all the instructions to the letter. I sanded the butcher block to the raw wood; I vacuumed all the dust and then cleaned it with mineral spirits and lint-free cloths and waited 24 hours for it to dry; I bought the Rubio Monocoat applicator pads, and I watched the videos on application. Then I applied it to the butcher block. The only thing I may have done wrong was not use a fine enough grit sandpaper for the last sanding (I used 180). It was a total hot mess. Every tiny blemish (unseen to the eye when sanded) turned black. In effect, the stain did not act like a regular stain. Instead of covering or minimizing flaws, it brought them out by turning them black. It looked purely horrible and was impossible to repair without getting out the sanders again, which I couldn't do at that point. My grievance with Rubio Monocoat was that they do not warn of this issue on the website. If there was such a warning, I wouldn't have used the product as I knew the butcher block I was trying to restore had multiple problems. So $40+ wasted (product + pads) and so much time and effort and all because there was not enough information about the product available. If you use the 2C with color, make sure you test a small section first, and if you don't like it, get it off fast since it bonds within minutes.

Just follow the directions and you will get great results!!

Très petit ( correspond à mon doigt) mais excellent produit donc rapport qualité prix/ prix : parfait ! Blanchit très bien

El precio es carísimo , el tamaño es como un bote de uñas es un engaño!!

So easy to use. Gives great coverage. So pleased with the outcome on a small pine table which had ring marks and scratches on it. Now I can't see them and it has given a much richer darker effect than the orangey horrible pine it originally was. I love the smell as well not chemically but just a nice gentle oil based smell. Great product and a little goes a long way.

El tamaño real del frasco es como un pintauñas, aunque en la foto parezca mayor. Demasiado caro para la poquísima cantidad que contiene.

Colour is good even on walnut. Prepare your piece properly, sand away glue and any marks as they come up and clean with brush and tissue. When applying Buff it as much as you can, (for my piece try to tape off the inside if you don’t want it) Wear gloves if you’re trying to avoid certain areas. It smells a lot so don’t do this without ventilation and or a mask. It’s one coat, so don’t bother doubling up. Unless you’re patching an area you missed. The biggest thing is though? It’s not as high shine as you think. And? Test it beforehand. Overall I’d give it 4 stars. (Pictures should show the stages)