Mini Table Saw with Belt Sander, Precision Desktop Woodworking Small Bench Saws Mini Sanding Disc Machine for Handmade DIY Hobby Model Crafts PCB Cutting Machine, 300W Power

Let's get the bad bit over first! The instructions are poor and assembly is tricky. The instructions I received appear to be for a different model as some of the parts were different (see the saw guard bolt - think it's photo 2?) or not included (the flexible arm - however this was not shown in the Amazon description). Fitting the chuck for holding the rotary attachments was very fiddly as the grub screws are tiny and I don't know why this wasn't pre-assembled. Attaching the saw blades is also difficult as access to the tightening bolt is restricted and so you cannot turn the Allen key (hex bolt key) easily. This is a problem as there are many different saw blades, cutters and grinders supplied (see last photo? ). However I have found that the blade can be tightened by holding the Allen key firmly and turning the blade itself to tighten (but use gloves and do the final tightening with the Allen key). The tool itself comes with two separate motors both of which have switches and the speed can be altered on the transformer (photo 6? - sorry the order has been muddled from uploading to publishing the review). The belt drive (photo 4?) is controlled by the first motor and comes with a selection of sanding belts of different grades (photo 1?). I have used this to sharpen knives very effectively. The other motor controls the saw and also the chuck. The saw has an adjustable back stop and also an adjustable angle setting (photo 3?). The chuck attachment has a velcro fitting to allow for various polishers, buffers and sanders (photo 5?). The tool will come in very handy for many small jobs but is not capable of tackling large DIY work (think Dremel compared with power drill)! but with all the functions and attachments is a pretty handy device.

Poor no power in it.

This is very versatile and comes with loads of attachments for cutting, sanding and polishing everything from wood to metal and tile. Great for making models and keeping model making tools in fine fettle. Takes 10 minutes to put it together (make sure the saw blade is the correct way around, it spins clockwise as you look at the drill chuck) and can fit in a normal sized back pack. Nice and light to carry about, but I'd recommend strapping it down it you're pushing anything heavy against it. Great for little jobs, but does struggle a bit with thicker stuff. Be aware there is not a lot in the way of safety, be sure to unplug it before making any tool alterations as I suspect it will happily take off fingers should it accidentally start up.

Hardly any drive/power on the Max 24v setting. Saw keeps stopping when meeting resistance. The wood I used was 10mm thick and it takes a frustration 1 minute to get through it. Quicker to use saw manually. Tried both sides of the saw just to humour myself. The belt sander is great hence the 2 starts. Very disappointed . Will be returning

ok

The product is a good for light work. I was a little disappointed that there was not a flexible drive attachment in the box, the box had been damaged, and on opening it, it looked like it had been opened and then repacked but not carefully.

The saw lacked any detailed instructions regarding the blades to use and the correct way round to install the blade. The latter was easy to work out. As I wanted a cut with a thin blade I fitted the wrong one and it kept jamming in the wood. As soon as I fitted the thicker blade that had a bit of outside clearance all was well. Overall I am very pleased with the saw.

Hobby work it won’t belong before it’s in the bin

Proprio bella come da descrizione.arrivata molto velocemente . Perfetto

Ein schönes Multigerät mit Entwicklungspotenzial. Die Säge lässt sich nur nutzen, wenn die Rollen vom Bandschleifer demontiert werden. Schade nur, wenn man nach dem sägen gleich schleifen muss. Hätte man den Deckel nur wenige Millimeter höher gesetzt, wäre beides nutzbar.

Seppur carenza rimediabile, non ancora potuto verificare il suo funzionamento in quanto, seppur venduto anche in Italia e' dotata, cosa molto antipatica, di spina americana anziché Europea. Seguirà recensione completa non appena in grado di poter acquistare l'adattatore.