phopollo COB LED Strip Lights, Multi-Color 576 LEDs/m High Density Flexible 24V Led Lights with RF & App Control, LED Lights for Bedroom, Kitchen, Cabinet Lighting-16.4ft

I only needed a 12" strip, and would have preferred to have 4 or 5 LEDs, but the cut point only provided 3. I made a cut after the cut point, hoping to get the 4th LED, but inadvertently made the cut between LED 4 and it's limiting resistor, which is after the LED and that 4th LED didn't get powered. Theoretically, I think you should be able to make the cut wherever you want, but need to make sure you include the respective resistor for which ever LED will be last in line. I may purchase the connector/ splice kit in the future to make a strip that includes a couple more LEDs. Nonetheless, with only the 3 LED's, the illumination is approximately what it was originally. All of the color combinations work fine. The plaque is an engraved plexiglass panel, with an aluminum housing across the top where the LED strip is located, and the light illuminates the panel, highlighting the engraved image. Not sure why so many are experiencing issues with dead segments, but take care where you cut, and if installing splice connectors, make sure you orient them properly relative to where the 12VDC line is on the strip, and the respective mark on the connectors. If everything is installed properly, any subsequent segments should be powered. Imprinted on the strip is +12V, C, R, B, and when two strips are connected together, the same alignment must be maintained - +12V to +12V. If the strip orientation gets reversed - 12v to B, any subsequent strip(s) will not work. If splicing, the cut has to be made in the center of the cut marks, ensuring there are exposed contact surfaces for the connectors to work properly. You cannot install the connector over the white surface of the strip - no electrical contact will be made.

This is the second box of these I've purchased, and I love them. The first set I bought I put under the countertop edge on my kitchen island and it's absolutely perfect for lighting the kitchen enough at night to sneak in without having to turn on the lights. I keep it on the purple color so it's not too bright. My son loved them so much he asked me to buy another set for his bedroom. He mounted his around his TV and on the wall behind his TV. I don't know how good that is for his eyes, but he loves it. They can be very bright or fairly subdued, depending on the color you choose. There are many colors to choose from. The remote is easy to use and the lights are VERY easy to put up. You simply peel away the wax-type paper backing as you go along applying it to the wall or whatever surface you are putting it on (TV, countertop, etc.). I found it easy to fold it to make square corners and it doesn't come loose at the corners where the fold is. Just make a square corner and pinch together the triangle piece sticking up and it works just fine. You don't notice the corner fold when the lights are on. It was also easy to reposition, as I lightly tapped the strip down as I went along, and then if I was going crooked I could lift it back up and try again. Only when I had it just as I wanted it did I press it down hard, and so far nothing has come loose. I've had the ones on the underside of my kitchen island counter for over a month, and they don't interfere with the cabinets nor has the tape come loose. The one thing I don't like is that you get two strips of lights, but they both connect to the power source at the same small connector, so you can't put the two strips of lights very far apart. They have to originate from the same place. I think I read about others splicing or something, but I'm not that technical. You just have to plan ahead when you are deciding how to place them so that you start both tapes fairly close to your plug-in. The power cord and AC adapter have nice long cords, so that is a plus - you can get at least 3-5 feet away from your plug-in before you get to the adapter the lights plug in to. I think the lights are great and if I find another opportunity to use them somewhere, I would buy more. Especially of this brand. I may have to measure and check out the length I need before I buy, but so far it's worked great.

The LED light work well was very easy to put up

So the product works fine. The colors are nice, it sticks to the wall, no issues with power, however. I realized something very strange when I changed the color and went to unpause youtube on my TLC Roku TV with the remote (the tv was approx 9 feet away from the power source of the lights and approx 2 ft away from the controller when I figured this out) But if the color was NOT set to light pink (the lighter of the two pinks as pre-set on the provided remote), unpausing youtube on my TLC Roku TV would cause it to switch from any of the other colors to light pink. I could resolve this by simply changing the color back to whichever one I preferred after the video was already playing, and the problem did not happen when pausing a video; only when unpausing. I have no idea how these two things are correlated? But it would only happen when I used my Roku Remote to unpause what I was watching. This is an incredibly minor issue that I'm sure I can chalk up to some sort of interference with the receiver of the lights, and the lights are perfect otherwise, but I wanted to mention this in case anyone experiences this same issue (and therefore proves that I'm not just a crazy outlier.) I don't know much about how wireless signals from remotes work, so I can't provide an explanation for this, but I thought I'd mention that it happened with this product :) 10/10 otherwise, great for different colored lighting in pictures. They are quite bright though, so I would avoid looking directly at them.

This is by far the best Amazon product I've ever purchased and no I am not hired by amazon to say this. it has adjustable brightness and several different shades to work with I used it to light up my mice's cage for night time and I will say it came out exactly the way I wanted it to, I'm really surprised at the quality as well. note: if the lights don't turn on then you must've put the connectors backward try flipping the cord over and make sure the battery in the remote isn't backward. I accidentally made the same mistake but it turned on after I flipped the cord to the other side.

I love it .it s Light up my Room and gives it a différent vibe

Simple to install and seems like decent quality. Plenty of color options and never had any issues with the remote. However, several different sections stopped working after 6 months of use.

Exelente luzes