Drip Irrigation Pressure Regulator and Filter, 25 PSI Water Backflow Preventer for 3/4'' Garden/Faucet Hose Thread and Drip Irrigation Inline Y Filter, 3/4" x 3/4" FHT Hose Thread Connections

Works great so far. I like that filter is removable for cleaning. Is rather long and almost touches the ground. Couples with a timer it is working great in my drip irrigation system for my veggie garden.

This works great! I've had it running for 6 months with no leaks or problems. The filter is easy to get to. I've opened it up and rinsed it off twice. We have some minerals in our water so my system would not work at all without this

This does filter like it’s supposed to do, but unfortunately, it has a horrible leak. The device is not broken, but it does not handle the pressure from the hose through its own system…. Because it controls the pressure, it causes its own connection to leak. I like the idea of it but the execution needs work for sure. I will likely be able to get desirable results with additional materials from the hardware store.

Had to return the first one because the pressure Regulator leaked. Second one is OK, but hard to keep from leaking. It is inexpensive, but you get what you pay for. I needed a second filter/regulator/backflow and ordered a more expensive one that is easier to use.

The components of this set connect easily and do not leak after using a few turns of teflon tape (in four different places). I don't have a way of measuring the output rate of flow, but it is definitely lower than my regular hose. I also use a separate inline filter first at the faucet because I've had problems with sediment from my well water clogging soaker hoses in the past. The whole setup works fine together. I recommend this product.

I accidentally ordered the 25 psi instead of the 35 but works just as well for my small garden

Fittings leaked even in low pressure environment. Even teflon tape tape didn't help.

This is a great all in one solution for adding a filter to our dripper system. Last year we got tired of watering our strawberries by hand so this year we installed a dripper system. We have 4 X 25 ft rows of strawberries and this 25 PSI regulator and filter works perfectly at keeping the drippers from becoming clogged and also keeps the drippers operating at the correct pressure. The filter is easy to clean by unscrewing the cap and removing the filter. Any dirt or sand washes off easily with a spray hose. The filter is large so it doesn't need cleaning very often. This was an easy system to install and we wonder why we didn't do it sooner.