Rust Converter for Metal ,Stops & Prevents Corrosion on Metal, Rust Converter Paint ,Inhibitor for Cars, Trucks, Trailers, Marine & Industrial Equipment, Rust Paint with Long-Term Protection, Permanently Stops Rust, Matte Black

It's a great product, goes on easy, and tough when dry

It worked great for the application I used it for.

I gave it 4 stars since I just finished my project and I will be hopeful the product lasts as expected. I am a teacher in a vocational high school in New Jersey. I teach auto collision repair and as you can see from the pictures I have the availability to use a paint booth with controlled temperature. First, I power washed the trailer, removed loose rust with an angle grinder with a surface disc conditioner pad. Sanded any spots that were rough and use a scuff pad on the trailer to ensure good adhesion. I blew the trailer off with compressor air tool and wiped it down with solvent cleaner.The first coat was mostly applied with a roller and brush. The paint dries fairly quick and when it was dry I applied a second coat. 24 hours later the trailer was dry and the paint appeared to be hard and durable. In a few months I will follow up to see how the surface is wearing. The paint spreads easily and covers very well. I used 2 quarts for the trailer. The product seems good but time will tell.

I don't have anything to compare this product to other than what I started with. Paint goes on great... Smooth and not tacky. I had to do a lot of work on some suspension parts on both driver and passenger side so I took advantage of the opportunity to cover some of the rust while I had things disassembled. I cleaned surfaces up with wire brushes on the drill and the paint adhered nicely. Brake dust guard looks eh bc it was eh to begin with. Rust on it was removed prior to painting and it's texture does not worry me... It's gonna last and save me money. I used half of the lil pail of paint to cover both sides w 2 coats.. I'll have enough to cover other rust on the underbody if I get around to it. I'd purchase this product again.

Good stuff. Cleaned and painted a very rusty mower deck. Holding up very well in my super high humidity environment. Would buy again.

Painted some lawn furniture that had rusted, cleaned the rust off and applied this paint, the furniture is out in the weather, but after just 2 weeks, rust is starting to show thru, also It is not Gloss black, more like satin finish, in my opinion, I have tried several coatings, and without a doubt, Benjamin Moore Super spec, HT, has held up the best, some outdoor furniture I have painted, exposed to the weather, have lasted over 5 years, and still going.

Used three coats of the gray on my bulkhead. Went on great using both a foam roller and the brush provided to feather it in. Brush cleans up with water but should be done immediately when through painting. I liked the color so much that I’m hoping to get away without a topcoat. Let’s see how long it lasts.

The first item I used this Metal Preservative on was a 2" square Universal Trailer Hitch. This Hitch was carefully coated using the Hot Powder Coating method, however the nature of the product is that one has to drill 5/8" holes for the end brackets that attach to the Car's frame. Also, I needed to cut off about 4" of the 2" Square Tube to allow the hitch to recess properly under the car, I prepaired all the cut steel surfaces with this material, NOT: This material dries very quickly, so wear old clothes and protective 5 mil Rubber Gloves. It leaves a minor surface that is noticable with close fitting parts like fine bolt threads on a precise size hole ! Note - I also applied the material to the OEM 2" Class Four Hitch on our JEEP Grand Cherokee, which used to show some surface rust after use, This material has "fixed the problem" ( i had previously tried several of the spray cans that said they would prevent rusting - Internal surface Rust would reappear within 2 days after using the 2: hitch ball for my 16' boat.