HiBloks Face Cover Pad with Cooling Fan for Meta Quest 3 Accessories, 2Pcs Face Cushion Cover Compatible with Oculus Quest 3 Fan Cooler, Replacement Facial Interface Relieve Lens Fogging (2 Speeds)

I recently purchased the HiBloks Facebook Cover Pad with Cooling Fan. This is actually my second purchase of this product as I seen they had made changes to the original design. Having owned the original design, I felt it was a solid product, but comfort was a bit lacking and some of the mesh inserts where the air would vent through came loose over time. I'm happy to say that both of these were things they fixed on the new design iteration! I'm reviewing this item around the same time as the groundbreaking Batman Arkham Shadows VR game has released, and if you have played this, you'll know how much of a workout the combat can be. This fan and face pad in turn have been a godsend, and I have no doubt, if Bruce Wayne was fighting in VR, he'd design some hi tech accessories just like this to aid him in his efforts. HiBloks has nailed this design providing a good balance of both comfort and functionality. The face pad comes with two options that adhere to the Velcro inside and provide unique feels to the way it fits to your face. Both are very comfortable, but I found myself gravitating more towards the leather pad more so than the cotton. I can finally play a couple of hours in VR and come out of it without a red ring on my face! 🤣 The fan is absolutely phenomenal. It operates with its own battery that is charged up via USB C and it mounts right on to the facial interface that is part of this product. It is very easy to remove, recharge, and equip again. The battery actually keeps a good charge for a decent length of time and blows cool air through the unit cooling you off and preventing sweat and heat from hampering your experience. The lenses do not fog up nor is there air blowing directly into your eyes and drying them out as the design vents it around properly to where this isn't an issue. I've also found my unit is less likely to overheat after hours of continuous high performance play. Another thing I'll add here is that HiBloks has also added in a piece in this iteration that forms around your nose and blocks out light leakage which is a nice extra value add. Overall, I can't sing this accessory's praises enough. To me, it's a must have to your VR arsenal.

My son sweats SO bad while playing his Oculus 3s. So this was a game changer for him! He loves it! Keeps him from getting super sweaty, works great, blows a good amount of air, easy assembly. He is 13 and put it on his Oculus headset himself. Buy it you won't be disappointed. 💯💨💨💨💨💨💨

I added the HiBloks Face Cover Pad with Cooling Fan to my FrankenQuest 3 setup, and while it’s a great concept, it has some drawbacks. The silk cushion is super comfortable, and the fan does an excellent job keeping me cool during intense VR sessions—until the battery dies. Pros: ✅ Comfortable Ice Silk Cushion: Feels soft and breathable. ✅ Keeps You Cool: Works great for high-intensity games. ✅ Quiet Fan: Barely noticeable when running. Cons: ❌ Battery Life is Lacking: Doesn’t last long before needing a recharge. ❌ Durability Issues: After a couple of months, it only works on high speed. ❌ Fragile Around the Nose: I actually cracked the nose section when installing it and had to buy a second interface. Probably more user error than a product flaw, but still something to watch out for. Final Thoughts: In my FrankenQuest 3 setup, this fan pad was a cool addition (literally)—until the battery limitations and fragility kicked in. When it’s running, it makes a huge difference in comfort and lens fog prevention, but the short battery life and delicate nose section hold it back. Great while it lasts—just be gentle when installing! ❄️🔋🎮

There aren't many options for facial interfaces with fans that are compatible with the Quest 3S yet. HiBloks seems to be first out of the gate with theirs, and since lens fogging is a big issue for me when using Supernatural in VR I went ahead and purchased even though I've never heard of the brand. So far I'm pleased, though I've only had the device long enough to use it in a couple of workouts. But the facial interface itself is very comfortable, the optional nose piece helps to block out some additional light, and the choice of face pad covers is nice since you can choose between comfort and washability if you need to. Unlike some fans for the Quest 2, this device blows air INTO the headset rather than pulling warm moist air out, and it has fabric covered vents on the bottom for exhaust. I thought that blowing air in would be annoying and cause dry eyes, but so far that hasn't been a problem. It actually kept me cooler than the exhaust style fan on my old Quest 2, and sweat was less likely to run into my eyes. And it reduced lens fogging to zero. The fans themselves (there are two) are reasonably quiet and seem effective. I can't say anything about build quality or longevity of the fan unit because I've only had the product for a couple of days, but so far it's more than lived up to expectations.

I love the idea of this product. It does indeed provide better ventilation to reduce fogging on the lenses. That said, due to the orientation of the device, it does pull in warm air from the vents of the Quest 2, so it ends up circulating warm air into your eyes, rather than cool room-temperature air. Pros: Helps prevent fogging Keeps face dryer while using VR in warmer weather Cons: Fan is quite loud Air pulled in is warm from the exhaust on the Quest 2 The material was quite warming on the skin, whereas the provided silicone cover for the Quest 2 felt cooler to the touch.

Un gros plus pour le confort en jeu. Qualité correcte.

Worked well at keeping the lenses from fogging.

It cools but it drys the eyes

The difference in cooling is amazing. So much more comfortable now. The fan noise is not noticeable at all unless i use headphones. but when i pair to my Sony WH-1000XM3 via bluetooth. for some reason the noise cancelling is not working for the fan noise. but its faint and i dont really mind it. There is no light bleed on top at all where the fan ports are. also i really love the gap between the quest 2 bottom of the fan. I think its a design decision. As the quest 2 top gets really hot after some use. so the gap with the fan drawing air in helps to cool it down. I am using it with Quest 2 Prescription Lens Adapter and it fits well. the foam face cover is a little thicker at the top but i dont really notice the POV difference. the nose gap is perfect for my nose.

Meta Quest 3を使って長時間のVRゲームプレイを楽しんでいる私にとって、HiBloks Face Cover Pad with Cooling Fan for Meta Quest 3はまさに救世主と言えるアイテムです。 この商品は通気性があり、冷却ファンも搭載されており、長時間のプレイでも快適に過ごすことができます。さらに、異なるスタイルのフェイシャルパッドが付属しているため、自分の好みに合わせて使い分けることができる点も嬉しいです。 取り付けも簡単で、レンズの曇りも解消されました。これにより、没入感あふれるVR体験をより快適に楽しむことができるようになりました。 HiBloks Face Cover Pad with Cooling Fan for Meta Quest 3は、VRゲーム愛好家にとって欠かせないアクセサリーとなりました。おすすめです！