FIDECO M.2 NVMe SSD Enclosure, M.2 NVMe to USB Adapter, USB 3.2 Gen 2 (10Gbps) SSD Reader for M & M+B Key, Sandwich Style Design, Tool-Free Installation, Support UASP and TRIM

The FIDECO M.2 enclosure allows you to connect an M2 NVMe drive directly to a USB 3 or USB 2 port on your computer (or other devices). Opening the package it immediately becomes obvious that the weight and feel of the enclosure is of good quality. The chassis is manufactured from aluminium (anodized) and the door mechanism has a nice 'click' to latch it closed. The NVMe drive is easy to install and completely toolless - just slide the drive in and close the door to secure. Connection to the enclosure is with a USB type 'C' cable which is included within the box with an adapter to convert to USB 3. (it'll be compatible with USB 2 and older, but will run a lot slower of course). The speed is very good on USB 'C', it won't match the same speeds as if the NVMe was installed directly onto the motherboard due to limitations of the USB 'C' controller, but is still very quick none the less. The FIDECO has a sticky heat transfer pad in the box that can be attached to the lid or base of the enclosure to help dissipate the any heat generated from the drive chips, also included are some small rubber stand-ups that will insert into holes in the bottom of the enclosure - to be honest I found these too tall and decided not to use them as they appeared to place the NVMe board under stress when the cover was closed. Overall I'm very happy with the performance, quality and connectivity of the FIDECO enclosure - plug it in and it works exactly like you'd expect a normal USB drive. I'd certainly recommend this product as it works perfectly.

This enclosure works exactly the way you want it to. Installing the NVMe drive was quick, and the tool-less design actually works without any fiddling. Once connected, the enclosure shows up instantly and delivers the speeds you’d expect from a USB 3.2 Gen 2 device. Transfers feel snappy and consistent, without random disconnects or throttling. The casing stays warm but never worryingly hot, even during longer file transfers. It’s compact enough to throw into a bag, and it feels sturdy enough for everyday use.

First great thing is it worked out of the box. The Full length NVMe (2280) fitted behind a rigid clip so it can't work loose!! - Great! Secondly it supports UASP which means the drive shows up as SSD not Hard Drive so you can use trim. [Nearly burned up the NVMe in a different enclosure - because it showed as HDD and not spotted and optimize was defragging the whole drive - not good!] Also I am using a Samsung NVMe and the Drive Magic works with this enclosure because UASP allows it to detect as Genuine Samsung drive - another bonus. Super fast - over 100MBytes per second (from a HDD - will be much faster SSD to SSD - preliminary test ~700 MBps) sustained and heat transfers well to the aluminium casing. My previous make enclosure was very difficult to fit because you had to try and slide the sheath cover over the thermal pad- rubbish.! Tis one hinges over and clips shut - great! Included USB-C to USB-C cable with built-in USB-Adapter another bonus if your machine does not have a USB-C socket! All-in-all great value for money! (Note : Shorter cards require a rubber plug. I had issues with these on a previous enclosure I have which allowed the NVMe to work loose and show up as faulty - no drive present.] Can't speak for this one though.

I’ve been using the FIDECO M.2 NVMe Enclosure with my Crucial P3 Plus (CT1000P3PSSD8), and overall, it performs well for my needs. Installation was a breeze since my drive is a 2280 form factor—it slots in without screws, held securely by the thermal pad and lid. The enclosure is made of aluminum alloy, which feels high-quality and sturdy, giving me confidence in its durability. The performance is solid, hitting USB 3.2 Gen 2 speeds as supported by my motherboard. With my Crucial P3 Plus, I’m getting read speeds around 998.59 MB/s and write speeds around 961.89 MB/s, which aligns with the expected 10 Gbps (1250 MB/s) theoretical max for USB 3.2 Gen 2, factoring in overhead. It supports UASP and TRIM, and the drive reports NVM Express 1.4 compliance with features like S.M.A.R.T. and VolatileWriteCache, ensuring efficient operation. I primarily use this SSD for storage and movie watching—no gaming—so these speeds are more than adequate for my use case. Temperature management is impressive. I swapped out the stock thermal pad for a high-performance grey silicone-based thermal pad with better thermal conductivity. Now, the drive idles at 34-36°C and hits 42-46°C under load, which is great for an NVMe enclosure. The aluminum build helps with heat dissipation, and I’ve had no thermal throttling issues during extended movie playback or file transfers. However, there’s a significant downside: the enclosure produces an audible high-frequency noise—sometimes a whirring, sometimes a beeping. In a typical setup, it might not be noticeable, but my environment is very quiet, and I’m particular about acoustics. This noise is incredibly irritating, especially during focused work or movie watching. Unfortunately, I only noticed this issue after the return window had closed, so I’m stuck with it. It’s a shame because, otherwise, this enclosure would be near-perfect for my needs. Overall, the FIDECO M.2 NVMe Enclosure delivers on performance, build quality, and thermals, but the high-frequency noise is a dealbreaker for quiet setups. Be cautious if you’re sensitive to acoustics like I am.

Güzel ürün, kolay montaj. Eski ssd usb disk oldu

A perfect product as described, with high-quality materials, easy to use, and worth buying.

Después de darle unas cuantas vueltas me decidí por esta carcasa, estaba entre esta y la Orico, porque lo que quería es que no fuera una carcasa que se instalase la parte exterior por deslizamiento, ya que eso significa que no hay contacto directo entre la goma disipadora de calor y la carcasa esterior, y solo vi un Orico y este Fideco que se ponían levantando la tapa encima del disco para que al bajarla, presione la goma directamente y la propia carcasa sirva de disipador, aunque me terminé de decidir por este, porque me parecía que el Orico también era como este, sin embargo luego veo en un vídeo que no, que a pesar de tener disipador en la zona del disco, en realidad se mete deslizando y por tanto, no hay contacto directo con la goma y esta a su vez con el disco, por lo que me decanté por el Fideco, que además tiene un precio excelente. Lo he probado con un disco NVME del vine y la verdad es que va muy bien, tengo velocidades por USB-C de cerca del GB/s, que no es poca velocidad. La tapa tiene como una bolita con un resorte para poder abrirla con facilidad, hay que hacer algo de fuerza, pero está genial, no necesitas destornillador para abrirla pero tampoco se abre facilmente con una caída o de forma accidental. Tiene un led diminuto donde va el conector USB, con lo que no es nada molesto. Incluye un cable corto de 29cm y en una de las puntas tiene un adaptador de USB-C a USB-A. En general estoy muy contento con la carcasa, es como tener un pendrive "gordito" muy rápido.

Ideaal om ssd strips te testen en/of als portable te gebruiken.

un adaptateur très bien. j'en ai pris 3. les transferts se passent bien (c'est plus les ports usb et ma carte mère qui limitent) le produit est facile à utiliser, mettre la pate thermique direct sur le disque le bloque (voir photo) au début je jonglais entre mes differents nvme (maintenant chacun a son boitier) la pate thermique est réutilisable (au pire on peu en recommander ça coute rien) bien sur lors des transfert le boitier chauffe (surtout si on transfert des très gros volume) mais ç'est pas non plus brulant et ça refroidit très vite je n'utilise pas forcement le cable usb fourni car il est court et que ma prise c se trouve à l'arrière sur ma carte mère (donc pas en façade), donc j'ai un cable de transfert C que je branche dessus mais sinon le cable d'origine marche bien