116in Cord Hider Kit, Cord Covers for Wires on Wall, Paintable Cable Raceway, Cord Hider for Wall Mount tv, tv Cable Hider Wall kit, Wire Covers for Cords, W0.96in X H0.57in, White

I recently mounted a new 65-inch TV on my living room wall, and while the TV itself looked fantastic, the dangling mess of power, HDMI, and soundbar cables hanging below it was driving me crazy. It completely ruined the clean, minimalist aesthetic I was going for. After searching for a solution, I landed on this 315-inch Cord Hider Kit, and I am beyond thrilled with the results. This kit is, without a doubt, the ultimate DIY solution for cable management. First Impressions & What's Included Right out of the box, I was impressed. The kit comes with a massive amount of raceway—315 inches is more than 26 feet! This was far more than I needed for my TV project, and now I have plenty left over to tidy up the wires around my home office desk. The plastic feels sturdy, not brittle. What really makes this a standout product, however, is the comprehensive set of included connectors. It comes with everything you could possibly need: straight couplings to connect pieces, flat elbows for 90-degree corners, inside/outside elbows for wall corners, and even T-connectors to split your cable run. It's a truly complete system. Installation Was a Breeze As a fairly average DIY-er, I was a bit worried this would be a complicated job, but the process was incredibly straightforward: Planning & Measuring: I laid out the path from the TV down to the outlet and measured the sections I needed. Cutting: Cutting the raceway channels to the perfect length was simple with a small handsaw. The plastic cuts cleanly without cracking. Adhesion: The pre-applied adhesive tape on the back of the raceways is incredibly strong. After wiping my wall with an alcohol pad to ensure it was clean, I peeled the backing and pressed the pieces into place. They stuck firmly and immediately, with no sign of budging. For those who want extra security or are dealing with textured walls, the kit also includes screws and drywall anchors, which is a thoughtful touch. Running Cords & Closing: I easily fit three cables (a thick power cord, an HDMI 2.1 cable, and an optical audio cable) inside the channel. The cover then snaps securely over the top with a satisfying click, hiding everything perfectly. The Flawless, Paintable Finish This is where the kit truly shines. The raceway material is designed to be painted, and it took the paint beautifully. I used a small brush to apply a single coat of my existing wall color (Benjamin Moore "Revere Pewter"), and the effect was stunning. The cord cover blended in so perfectly that it has virtually disappeared against the wall. You would never know it’s there unless you were specifically looking for it. The result is a seamless, professional installation that looks like the wires were run inside the wall. Final Verdict This cord hider kit is a 5-star product through and through. It provided an affordable, easy-to-install, and highly effective solution to my messy cable problem. The generous length, the complete set of connectors, the strong adhesive, and the flawless paintable finish make it an unbeatable value. If you're tired of looking at a "rat's nest" of wires on your wall, do not hesitate to buy this kit. It’s a simple project that delivers a massive aesthetic upgrade to any room.

This is exactly why I was looking for. Fits 2 (maybe 3) normal extension cords inside the channels. The channels stick to the wall very well but if removed might cause some paint peeling so beware. I’m not worried about that as these are a permanent solution for cable management. I purchased the 113 inch first and liked it so much I bought the bigger box for more projects and have plenty left over. They look good on the wall, even without putting lines or using a level. The covers that go over each piece to connect them do a great job covering the gap. I’m very happy with these!!

This is a quality prouct! Given the economical price, I had several concerns; but the minute iI started installing it they were all put to rest! The adhesive backing grabs tight and holds fast. The channel and ccover snap togetther solidly and still slide easily. The fittings fit perfectly. My congrats to those who designed and manufactured this item! Job well done!

First: the sticky side works; make sure you place it in the right spot the first time; very strong bond. The plastic is a little flimsy, but was able to hold a 14g, 15A, 3/8" wire with no problem. Really no need to slide the cover on; if you place it correctly it will snap on (handy if the channel ends where you can't slide the cover on.

This cord hider kit is absolutely amazing. The 40-piece set, provides plenty of coverage, making it perfect for managing TV cables, home office wires, or entertainment setups. The installation was straightforward and stress-free. The adhesive backing sticks firmly to walls without damaging the paint, and the paintable surface allows the raceways to blend seamlessly with any décor. I especially appreciate that it keeps cords completely hidden, creating a sleek, clutter-free look. The quality of the material is excellent it’s sturdy yet flexible enough to navigate corners and edges. I really recommend them.

Did the job. Easy to work with and modify when necessary. Looks good . Would purchase again

I recently purchased the 630in Cord Hider Kit, and I couldn’t be happier with the results! This kit is a game-changer for anyone looking to organize and conceal wires in a clean, professional manner. The 40-piece set, each measuring 15.7in x 0.96in x 0.57in, provides plenty of coverage, making it perfect for managing TV cables, home office wires, or entertainment setups. The installation was straightforward and stress-free. The adhesive backing sticks firmly to walls without damaging the paint, and the paintable surface allows the raceways to blend seamlessly with any décor. I especially appreciate that it keeps cords completely hidden, creating a sleek, clutter-free look. The quality of the material is excellent—sturdy yet flexible enough to navigate corners and edges. The white finish looks clean and modern, and after painting, it virtually disappears against the wall. Overall, this cord hider kit exceeded my expectations. It’s practical, versatile, and delivers a professional finish. Highly recommend for anyone tired of messy cables and looking for an easy way to keep their space organized!

Cumple con lo que dice, cubre los cables, pero el tamaño de las piezas es muy corto, poco más de 30cm por lo que tienes que estar poniendo las uniones muy seguido además de que son muy difíciles de manipular una vez que están puestas y si quieres mover algo tienes que sacar desde el inicio del trayecto ya que de no ser así se rompen al intentar sacarlas puesto que es un plástico de mala calidad sinceramente, saca del apuro, pero mejor comprar en tiendas locales como The Home Depot tramos largos y de mejor calidad.