Glue for PVC 350 gr Hardener RFE 30 gr Plastek 82 mastek

Description

Glue for PVC 350 gr hardener RFE 30 g Plastek 82 Plastek 82 complete with induritoreil prodottoadesivo tpu specifically for the boat industry to open short time, can be used as 2 K to reactivate to warm.The film of Plastek 82 has a good water resistance, excellent cohesion force, high tack, excellent resistance to plasticizers, and is virtually colourless and very elastic.Where it employs Plastek 82 and is specific for the gluing of mute from sub and tubular PVC in the preparation of vessels tyres.How impiegalavare the PVC with a degreasing solvent, wait 10 – 15 minutes, then spread on both surfaces a uniform layer of Plastek 82 and leave to dry for 10 – 15 minutes. The materials must be united after the wake to warm the sticker, then the procedure and is the following: Heat the surfaces up to 65 – 75 C and pressing carefully without deform the materials.The full membership it has a minimum time of 48 hours after the gluing. The dry product is odourless, flexible and light colour. Gli incollaggi performed with Plastek 82 have a good mechanical strength and allinvecchiamento. For further increasing the strength of the gluing allatrazione and heat it is possible to add to product a percentage of about 8 – 10% of reticolante. In this case the wake it can not be performed after more than an hour by the coating.confezionilatte metal from 0.125 kg, 0.400 kg Net, 0.9 kg, 4.5 kg.avvertenzeattenzione Plastek 82 and is highly flammable: Ensure that the Impian