UMIACOUSTICS 2 PCS Acoustic Panel, 47.2" x 23.6" Fiberglass Sound Proof Wall Panels, Sound Absorbing Panels for Studios, Office, Home Theater. Charcoal Grey

Great product. Looks great only two concerns: 1. The Sheetrock anchors are too small to grip the Sheetrock with many pushing through even with a small drill hole 2. The templates are great but not all templates are the same which caused some minor alignment issues but once figured out, install was perfect. We ordered 7 sets which have helped and will order more to complete the install

Theses panels not only do the job absorbing sound but are good looking and sturdy enough. They seem to be built to last. I have mine resting on the top of a bookshelf (so they can be moved if necessary) so I can't comment on the quality of the mounting.

First, get your own sheet rock wall anchors. The ones that come with the panels push right through the sheet rock. After that small annoyance, installing them with the provided template was a breeze. Just make sure of your measurements of course before you drill. I used painter’s tape on top and bottom of the template which made positioning easier if doing by yourself. The panel’s quality is very good and they made a difference in the echo my room originally had. May add 2 more on the one wall just below the ones I hung today.

Remodeled my studio/office/den, including new flooring, and noticed some very troubling reverb/echo even after putting down rugs. From my listening position, I could hear the echo from the far right wall at nearly half the volume of the speaker source. Putting 8 of these on that far wall eliminated that reverb. In the listening space portion of the room, clapping produced a highly audible flutter echo. I put 9 of these in strategic places on the exposed wall surface opposite the speakers. Even just 2 of them eliminated the flutter echo. I put another 7 on the wall behind the speakers and that resulted in a room that still has liveliness, but no reverb or echoes. The mounting brackets for these are decent, but while the manufacturer allowed for the brackets to support the panel either horizontally or vertically, the mounting nubs on the back of the panels are only leveled for vertical mounting. There was one place where I needed to mount horizontally and that was a pain. The included wall anchors do not have any flange to prevent them from being pushed into the wall, nor do they have anything really preventing them from turning in the wallboard as you screw into them. In addition, the included screws are drywall screws with a tapered head instead of flat. This means that if you are screwing them in the vicinity of the edges of the bracket holes, they will push the bracket up or down making leveling difficult. Do yourself a favor and buy better anchors and screws and the install goes much easier. Each panel has two bracket mounts. Unless you're a masochist, only use the top one. Getting two brackets perfectly leveled and aligned, even with the including mounting template, is an exercise in frustration. The panels hang just fine using only one bracket. My walls are a shade of gray and the gray ones were just enough of a contrast without being obnoxious. I will probably order a few more to treat the TV area of the den. Overall these are very effective in eliminating reverb and echoes and saved my studio renovation.

Look great, work very well. Super easy to install, even comes with a cardboard template with holes for the screw positions. They look much nicer than they cost, great value. I can't attest to what frequencies are absorbed, or by how much. I'm not running REW and haven't done measurements yet but there is a noticeable improvement. I'm using them to subdue first reflections combined with diffusion panels. These SHOULD even work well on the ceiling thanks to the bracket system but I haven't done that so no promises! I can't see why they wouldn't work? They even have a roughly 1/4" air gap behind them when installed on included brackets. Not perfect but better than nothing It's really a clever design. They are mostly decoupled from the wall. Definitely getting more of these.

Seems to cut some of the echo and harshness of sound in my home office. They seem well made and were fairly easy to mount to the wall. The materials seem high quality. Some of the edges seem thin but will see how it holds up. No complaints.

Fantastic product beautiful quality bracket system if your going to hand attractive fantastic packaging just a wonderfully made product and how do they make the room sound…..excellent

Thse panels are well made. The fabric is attractive and installed perfectly. I especially liked the system for hanging the panels. They come with all the necessary hardware and I found it very easy to install. As far as performance, I bought 4 panels for my 11' x 22' room and it tamed the overly reverberant room. Before the panels where installed, my hi fi rig was unlistenable. I have 2 area rugs, 3 fabric chairs, a large bookcase with 650 records and various plants. None of that tamed the echo I was hearing nearly as much as these panels. For reference, I previously had my hi fi set up in another smaller room that was very well damped without acoustic panels. The current set up sounds just as good. Definitely worth the money for these well made panels.

Unfortunately, the product quality was much lower than expected. The panels arrived with poorly finished fabric, uneven thickness, and inconsistent foam filling. The overall build quality does not feel professional or like a new product. The sound absorption effect was also very limited compared to what is described on the product page. Based on my experience, I would not recommend this product.

These panels are awesome. I have my drumset in a corner of the room and they produced a terrible echo when playing. I put four of the smaller panels up and it improved the sound by alot. They are well built and look great.

I set these up in my wife's office area and there was a vast improvement in the echo in the room. I need to purchase more and eventually have the walls covered.

I like the look of this wall panel instead of the black acoustic squares. I mounted it behind my computer desk. It was easy to mount with the included hardware and template. It looks nice, but is hard to clean/dust. I found that it dented easily, having bumped my monitors or hub into it several times. Light finger pressure on the edges also created dimples. It worked to reduce echoes, but not sure I'd order the light colour again.

We got a very expensive quote from a local vendor for some sound absorbing panels. These were a fraction of the price and work great!