ProArt X870E-CREATOR WiFi AMD AM5 X870E ATX Motherboard PCIe® 5.0 x16 Slots with Full Support for Next-gen GPUs, 16+2+2 Power Stages, DDR5, Dual USB4®, 10 Gb & 2.5 Gb LAN, WiFi 7, Four M.2 Slots

Excellent built quality for the ASUS motherboard. First time boot trouble as I have not attached the liquid cooler and used only an air fan before actually fixed into the computer case. Only figured out that the sytem shuts down due to CPU over temperature and took some remedial actions, all the rest are getting back to normal. Installation for RAM, SSD, Display Card are all easy. ASUS's software takes care of everything regarding driver installation. Ran a 100%CPU test for some 30 minutes, not trouble at all.

TL/DR : Pretty board , let PC sit overnight in failed POST mode after enabling EXPO to let BIOS learn RAM timing. If you're looking at this board , you've probably learned all the quirks about the X870E chipset and PCIe5 lanes bifurcation / sharing with NVME slots , so I won't rehash that. My main reason(s) for the review are twofold: 1) The build quality is awesome , the materials and aesthetics are (subjectively) topnotch. I'm not an RGB-vomit fan , but the murdered out black look is so... dead. So, it's nice to have a minimalistic look with a trace of elegance. Building on it was straightforward. I had no fitment issues with a 2280 form factor NVME in the M 2_1 slot (w/ heatsink) interfering with an ASUS TUF gaming RTX4080. It all fit and worked well inside a Lian - Li Lancool II Mesh using the ProArt AIO360 radiator mounted to the front of the case. Everything snapped in easily & securely. there was never a "hmm, is that right ? " No it was all pretty much a breeze. 2) The Ram LED POST fail coming on after enabling EXPO. This freaked me out. If I then cleared CMOS , reboot , then it would POST. However after reading up this is SUPPOSED TO HAPPEN. I then went into BIOS , enabled EXPO for my (4x16 GB) 6000 CL30 RipJaws ram profile , and let it sit in the failed state. I woke up the next morning to a windows boot screen. The BIOS had to do some internal clock checks that took a fair bit of time, but it eventually POSTed and has been solid since. So , that's my piece , enjoy !

Works great with my 9950x3D

I have been building my own systems for over 30 years, so I am very confident in my builds. I have an AMD 9950X3D processor, 96GB RAM, 6TB of M2 HD, and an Nvidia 5070ti 16GB VRAM, so a good system and all new parts. This motherboard was unstable from the beginning, I tried updating BIOS settings, installing all the newest drivers and after a month of trying to stabilize it due to crashing and freezing up, I finally requested a replacement. I was sent a refurbished motherboard which ahs been very stable, but apparently not checked when they sent it to me as the Bluetooth does not function at all. Now I am being told they will refund me and I have to send the motherboard back, which was one I carefully selected for the specific functionality it gives. I will have no operational computer until I buy a new motherboard, and I will have to wait for the refund before I can make the purchase. As I understand it they do not have a motherboard in their warehouse they can send me, which means they do not have a refurbished one. I had always had good luck with Asus previously which is why I purchased the motherboard from them, this is the worst motherboard experience I have ever had, and I will not be buying Asus products again.

La verdad debo decir que es una tarjeta madre muy elegante, hermosa y a la vez potente, es justo lo que necesitaba, sin problemas ya después de varios meses de uso.

Please Read First: I went ahead and made an "official" review below, but if you're looking for solutions to power settings with this board, this is the section to read. If you have issues with the 2.5gbit network port randomly turning off, you can add these settings to GRUB to fix the issue. Commands: optional [copy/paste] nano /etc/default/grub look for the line that is similar to this: GRUB_CMDLINE_LINUX_DEFAULT="quiet" add these two rules: pcie_port_pm=off pcie_aspm.policy=performance the finished line should look like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet pcie_port_pm=off pcie_aspm.policy=performance" This should fix your issue with the 2.5gbit port turning off. I have not had problems with the 10gbit port yet, but I have seen some complaints about it on Reddit. (I'm just a Linux guy) Initial Impressions: ● Packaging and included accessories - Great as usual with ASUS boards. This board had a lot of accessories, nothing too out of the ordinary. ● Build quality and physical design - Great build quality, and the board design is clean and without RGB, which I wanted for my server. Key Specifications and Features: ● RAM support and maximum capacity - I used server RAM for this motherboard. Well, half server and half standard. The RAM I used was the NEMIX RAM 128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V 288-PIN ECC Unbuffered UDIMM KIT. They sell this on Amazon. I just copied the listing title. ● Storage options (M.2, SATA ports) - I saw limited SATA ports (I think two), but I am unsure. I currently have the new M.2 from Samsung that is gen 4 and 5 running on one slot and another 2 NVMEs. All is running well. (Total of 3) ● Important features (Wi-Fi, Bluetooth, RGB, etc.) - No RGB (That's a plus for me) I don't use Wi-Fi or Bluetooth, but I did notice that when I turned Wi-Fi off in the bios, it killed my 2.5gbit ethernet port. This was annoying but not too big of an issue. Installation Experience: ● How easy/difficult the installation process was - The installation of Proxmox was easy. I did update the bios to the latest firmware because my ethernet port died, thinking that would fix it, but it didn't. The update was unnecessary as it did nothing for me. - The board runs Linux well, and GPU passthrough worked well without issues. I have a dGPU 4060 TI. ● BIOS interface and user-friendliness - Same old, same old with ASUS. Nothing special Performance: ● Stability during regular use - I haven't noticed any stability issues. ● Overclocking capabilities (if applicable) - It's ASUS. They offer fancy AI overclocking. (I wouldn't recommend it but to each their own) ● Temperature management - I use Linux, not great. Windows would be fine. ● Boot times and system responsiveness - Boot times are pretty good. I haven't noticed anything different from other modern boards. Value Proposition: ● Price compared to similar motherboards - This is a tough one. I got this board because I needed both ethernet ports, and my case is a 3U with a dGPU, which takes up all my PCIE slots. If you can just slot in a normal ethernet expansion card, do that instead before buying this motherboard. ● Whether the features justify the cost - No. ● Any missing features that buyers should know about - Nothing I have noticed but you can find more info about it on Reddit. I know I saw minor changes, but nothing crazy. Conclusion: ● Overall recommendation - I do recommend this motherboard for a server that is tight on space. I run OpenWRT on my server, which requires a WAN and LAN port. I couldn't fix a ethernet expansion card so I was required to get this board. If you have a 4U case and want to run a server. Get a cheaper motherboard. ● Who this motherboard is best suited for - Uh, servers, power users, or YouTubers.

I love how the menu on bios is so modern. It has a search feature, and the settings are all very easy to search up and configure. It has some nice overclocking features. This bad boy has two Ethernet and wifi7 which is super convenient. Installing everything on the motherboard was really simple as well. No paper manual, but it's online version is great.

Amazing, motherboard

Excelente producto

Arrived DOA, could not boot, shutting itself off after 6 seconds. Unfortunately my son died and I was in no position to claim a refund within 30 days but Asus did issue a return for repair and I shipped it (not sure if I'll be stuck with the shipping). They said that THEIR tests showed a normal board but that I will get a new one regardless. Still waiting, but the reason I award only 3 stars is because a DOA product never gets more than that in MY book. Addendum: the manual is IMO extremely superficial and of not much help.

MT7927 Wifi not supported on Linux. Most recent boards may have had the WiFi replaced by a QualComm board and not the useless, on Linux, MediaTek MT7927.

Very nice motherboard, but wi-fi and bluetooth do not work with Linux operating systems due to lack of drivers. Hopefully this will be addressed soon.