HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black | PCIe 5.0 Vertical GPU Kit, 11x 140mm Fan Slots & 2X 420mm Radiator Support, SimpliCable Cable Management, Tempered Glass, PWM Fan Hub

First complaints then the positive at the bottom.there are a few manufacturing details I struggled with and still am in a way. the top panel doesnt fall into place as easily as all those doing the YT reviews. usually takes several attempts to get it just so so to fall into the power button.heir front panel connections are great BUT, they are soooo long, I have no clue how they think you need all of the cables to reach the lower far corner of the mobo. this caused me to use the channel ment to run fan wiring along the top to holding these.design wise the back panel could have most of it covered as you arent really using the back 4/5 of the case for fans. makes it more suceptable to possible splashes (ask me how I found this out)... also means cable routing is even more important as its all on show through the back.the fanhub towards teh rear is in a bad spot, its where someone is likely to put their hand when grabbing to turn the case.outside of these things however (you are probably wondering why the 5 star review), this is the easiest case I have worked with. easy to route most of the cabling, no cussing trying to get wires or cables to fit through a tiny gap (CPU power 8pin x2) lower board headers easy to reach, lots of fan/AIO options. mounting options for storage and/orfans and/or LCD screen.even without the panels on it is a very sturdy design (albiet HEAVY). no flippy floppy is it gonna break worries. if you have the room to put this monster of a case, I would recomend it above all other cases Ive dealt with. whether you are a first or second time builder or you just have hand issues (like myself) this case makes it so easy to build in. and for those that remember... this thing is almost Tonka tough.for their first case design... they hit the mark. if they continue they will be undisputed in case designs.

I'm actually blown away by this case.. The fit and function of this case is revolutionary! The quality is out of this world when it comes to PC cases. The metal is thick and extremely tough, though very heavy at the cost (which I'll take that trade any day). The cable management, rubber grommets and literally everything was thought over and made installation extremely easy. The cooling the best of the best hands down if you do it right. Also, don't get me started on the looks.. It looks FANTASTIC! literally everything about this case sets a complete new standard of how PC cases should be designed.No wonder they took a years to overlook and think about every single aspect of this case. The price tag might look expensive for a PC case, but this should AT LEAST be a $400 case.HAVN, you absolutely killed it. This will be my main PC case for many, many years to come. So happy that I tried this case out!Thank you HAVN,Brandon

A real pleasure to build in this case. Fit a 240mm radiator on top while waiting for my 420mm to arrive. Both work fine. Thicker radiators could be an issue with some large motherboard heat sinks, but my 420 rad is only 30mm and it wasn’t an issue.The airflow can work very well even without filling all the fan slots, however most people will want to run at least 6 (3 reverse blade fans on bottom, 3 standard blade fans on top) for appearances. 8 will be normal for most people I think. It can take 11 but that will be overkill for most, and fancy rgb fans aren’t cheap.I used Squama fans on top and bottom, and light wings in the rear. Well, I’m still waiting for 1 fan to arrive, but it all looks good already as it is.With the huge xfx Mercury 9070xt, probably the largest version of the 9070xt, there’s tons of room to spare. Even 90 tier cards will have more than enough space.If you build with the horizontal GPU version like I did you will want a large GPU or the case is going to look empty.I think the horizontal version is tragically under-appreciated; it’s an amazing case even though it lacks the novelty of a vertical GPU.Build quality is amazing. I’ve never owned a case this nice. The glass is surprisingly thick.Lots of room for cable routing, although a few cables do have to go through a tight space above the PSU to get to the bottom of the mobo. It also doesn’t have quite as much space around the PSU as a true dual chamber case would, but it’s still more than any case I’ve previously owned.All of the panels have magnetic latching, although I wish the magnets were just a little stronger especially on the large back side panel behind the mobo. If your cable management isn’t tight bulging cables will push the panel right off. An extra magnet on that side would be a good update for HAVN to make. The panels can be screwed down and you will likely want to do so, although it’s not required.

A gorgeous case, the quality is top notice and the design is well thought out. The pathways for cable routing makes running cables easy but also looks good too. The space for your components is vast, this case was able to hold my 60mm thick 360 radiator no problem. The cooling on this case is amazing, I ran some stress tests on my current system and it stayed under 50 degrees C.

Amazing Case. HUGE! Heavy Duty. Tons of Air Flow. Came with everything you need and cable management was a breeze!

The media could not be loaded. Best purchase of 2025 hands down. The aesthetic and functional appeal of this case is exquisite. Solid value for money, optimal cooling setup and configuration options, very easy to clean the mesh vents and easy to disassemble for ease of access.