Magnetic Oil Drain Plug Magnetic Sump Drain Nut Oil Drain Bolt (14x1.5, Red)

Delivered on time. Great price. As previous reviews have stated, the supplied crush washer was an odd size. I also ordered the 50pc Honda oem crush washer set with this. I used a factory crush washer instead of the supplied crush washer. It works fine. I didn't change my oil when replacing this plug and the flow stopped way before the plug was threaded in all the way. That was 3 days ago. I have no reason to believe this plug will ever leak if used properly. As to people who think it will strip out easier, well, the plug head is 14mm and 6point. Which means a 14mm six point socket should always be used. Anything else is just asking for the plug to get stripped out. And, it's an oil plug. They don't need that much torque to seal. Especially on aluminum pans such as the one I have.I would buy again and/ or reccomend this to a friend.

I use the blue one for my oil, and the red one for my trans. Been using them for 7+ years without issue.The magnet is solid and cleans easily. The aluminum threads do not strip or break, and holds up to proper torque specs (snug or 22 ft.lb).You will need crush washers (changed every other drain), but the product works as described!Will gladly buy more for my other vehicles!

great product

Made of cast aluminum.Broke in half after first oil change.Luckily the oil change was at the dealership and they got the other half out.Don't buy this junk. Would be zero but the minimum is 1.

Bought for an 04 Elantra with high miles. It is decently light weight in comparison to the OEM oil bolt. The magnet is very strong, and the boot head and threads are aluminum. The only issue I had was getting it to thread, but it is a new bolt, it needs broken in a little and it is a smaller size than original. I'm about 1500 miles into this oil and I have no leaks. Will update in another 1500 with pictures, I can't wait!

I installed this but haven’t drained oil since to check for any particles attached to magnet, so review is incomplete. I like that the head is 19mm which is much more robust than the stock 14mm. It came with one aluminum crush washer so I bought a 10 pack on the side. I should have looked up torque setting ahead of time. Once on the ground I was too lazy and oily to bother so just tightened it good and tight. I had to use a breaker bar to get the original off which seems too tight… not sure if since this is aluminum, torque setting would differ from factory spec.

I ordered this magnetic oil drain plug for a 2021 Jeep Wrangler Rubicon 2.0L turbo motor. I was challenging to find the correct plug with internet research, but M14-1.50mm is correct.The head is 14mm wrench, which is a little odd, but not a deal breaker. The magnet seems strong enough, but time will tell. The anodized finish looks good and didn't mar when installed. I wish the face of the head that seals against the pan was a little bigger, but it did cover the opening with the supplied washer.

not much more to this product, it is a magnet and it threads in wonderfully. I like that it comes in colors