1000g UV Resin ki Crystal Clear, Hard, Low Odor, Premixed UV Epoxy Resin Glue Fast Curing for Beginners Jewelry Making, DIY Crafts, Casting Coating and Resina Art

I jabe ordered many different brands and types of UV acrylic and 2 part epoxy style acrylic.... with out a doubt, this brand "HeyClear" has been the best so far. I take into account the bubbles, working time in low light, setting time, viscosity, shrinkage (😆🤣😆), stickiness after setting, and how well the different types of mica Pigments (metal flake, pearlescent, UV glow, sparkly, and the basic colors; several btands) mix in. I couldn't be happier as I have ordered and used all of the lowest price brands available thru amazon, walmart and shein. If u are looking to save money yet use a quality product this is the one. Theres no stickiness after setting. Errant edges sand easily. Theres a very low bubble content, they ALL have some bubbles, its unavoidable. It sets very fast in direct sun light and good quality UV light. I seem to get almost 4x the time to work with it to mix colors, pour into the mold, and remove bubbles in the vacuum chamber than any 2 part ive used (have half a gallon left of a 2 part im saving for back-up cuz any of them give you only a few minutes working time, ridiculous). It sets super fast once exposed to a 50 or 55 watt UV light (designed for use with screen printing UV inks)... even the larger and thicker molds that are completely sealed with no bare liquid exposed, with absolutely ZERO stickiness left behind, just perfect always!!! All of mica pigments mix completely and thoroughly, even the cheap ones ive had clumping issues with in the past, there are no spots/areas on the bottom of the mold where poorly mixed pigment has settled which ive dealt with in the past given shorter working time from other brands, generally I mix colors IN the mold eith a toothpick (if its long enough) because they create less bubbles; (I also sand off the toothpick points to avoid those lines they will create in the mold that can be seen on the surface of the finished product). I use a few yellow (low UV lightbulbs while working (more visible light than red darkroom bulbs)..... it took me a while to realize that all lightbulbs give off enough UV to slowly set the acrylic 😆🤣😂.

Okay so this was take 2 of trying out this UV resin. The first time it arrived I was flabbergasted because it came out so thick and wouldn't spread. It was useless for my needs. I contacted the company but didn't hear anything back so I returned it. I finally heard back and recieved sincere apologies for the email mix up as well as the mix up with the product. I had been sent a very high viscosity by mistake. They offered to make things right but I had already sent it back. So we came to an agreement on me being willing to give them another go, so when I needed more UV resin I decided okay let's try again. I have not regretted it. This UV resin works so well. It came out smoothly and the finished product was clear as glass so I know it will work well in my future projects. I actually used it in my own homemade mold and the result is just stunning and people can't believe I made if from UV resin. The small amount of bubbles are easily removed with a quick spray of isopropyl alcohol. There was no smell and no fumes that irritated my face such as i got with another brand I won't name. It cured with no stickiness and even though a thick project it cured all the way thru. All in all I am so pleased and will definitely be using more of their UV resin in the future. Thanks to Ann in their customer support for convincing me to give it another try.

Love this uv resin. It doesn't yellow over time and doesn't have a strong odor like other uv resins. Cures fairly fast and is easy to use. Will definitely buy again

I use this resin as a top coat for my crafts and it's super shiny. There is absolutely no smell at all. I haven't seen any bubbles either. I cure this in the natural sun which takes about 3 minutes tops so it cures fast. There is no stickiness at all after it has cured. The only con I would mention is that the bottom of the container has a ridge in the middle which makes it a little wobbly and that's a bit impractical. I would definitely recommend this resin and it was a good deal money-wise. It's easy to use as I pour it onto what I'm sealing and then use a paint brush to spread which works great. I do put the paint brush in nail polish remover immediately after and this works for me. I think rubbing alcohol would work the same.

I had high hopes for this 300g UV resin kit, especially since it claimed to be “super clear,” low odor, and beginner-friendly. Unfortunately, it turned out to be a nightmare to use. The resin is incredibly thick—so much so that squeezing it out of the bottle was painful. It felt like I was trying to push out partially cured resin, and even after curing under UV light for 3–5 minutes, it remained extremely sticky and unusable. The texture coming out of the bottle seemed like it had already started curing inside, which is a huge red flag. While this product was cheaper than my usual brand, the quality just isn't there. Sometimes you really do get what you pay for. This resin caused more frustration than it's worth, and I won’t be buying it again. Update: maybe I got a bad batch of this Uv Resin Seller made it right and gave me a refund.

Pros: cures quickly in the sun( I don’t normally use a lamp so I can’t speak to how fast it works under a lamp) Super clear and hard! You only have to use a small amount in comparison to others I’ve used. Con’s: much stronger smell than the other brand I normally use, noticed more bubbles than other brand. My overall thoughts: I will definitely use again and may actually switch. For what I use it for it is perfect! I used a torch to get out the bubbles quickly and I absolutely loved how glassy looking it is!

Perfect 👍🏻

Ottimo prodotto lo consiglio Facile da stendere e asciugatura rapida sotto lampada UV

Ayant testé d’autres résines UV, celle-ci est de loin la meilleure, épaisse mais pas trop, s'applique tres facilement, et ne colle surtout pas apres séchage. Je recommande

durchhärten von größeren teilen nur mit großer UV lampe zu empfehlen, ansonsten Keinteile und kleben funktioniert wunderbar. Sehr zu empfehln

Super produit pour mes créations 3d , il faut juste réchauffer un peu le bidon pour que la résine soit plus fluide.