- BIQU CryoGrip Pro Glacier Build Plate 235x235mm, for Adventurer 5M Pro/5X/Ender 3 V3 SE/3 V3/3 V2/3 S1 Pro/3 V2 Neo/3 Pro/Ender 5 Pro/Kobra 2 Pro/Neptune 3 Pro/4, Low Temperature Printing

Totally worth buying. Run cooler bed temps and still get better adhesion. Oddly enough I find I get a smoother finish from this plate than their Glacier, which is labeled as the smooth finish. Awesome texture, superb functionality, and high quality steel.

I bought this plate because I had several failed prints due to adhesion problems between PLA and Bambu standard textured PEI plate. This plate works perfectly - no need for messy glue stick. Perfect adhesion across the whole surface and easy release when plate cools off a bit. I also like that it's almost smooth - with very subtle texture, and plate temp could run lower then with PEI plate - doesn't hurt to save a few buck on electricity. Have not tried printing PETG with it yet, but that worked very well with PEI.

The build plate came sealed and perfectly protected, no damage at all. I’m using it with my Bambu Lab P1S, and I’ve since swapped it in place of the standard textured PEI plate. If your printer doesn’t have the QR code reader, just remember to manually adjust your build plate settings—it makes a big difference in print quality and adhesion. What I Like: Adhesion is excellent, easily better than the original PEI plate. Prints stay firmly in place during runs, even larger or more intricate ones. The surface feels durable and high-quality, and it’s clear this plate was built for reliability. It’s been great for detailed or tall prints where strong first-layer grip really matters. What I Don’t Like: That same strong adhesion can be a double-edged sword—it makes removing prints a bit tougher. You also can’t really print rafts or very flat items directly on this plate because they’ll stick too firmly. It just takes some tuning to find the right balance in your print settings. Would I Recommend It: Yes, for anyone looking for stronger adhesion and more consistent prints than the stock plate provides. Just be prepared to tweak your settings and handle removal carefully. Once you get it dialed in, it’s a solid upgrade.

I have a Prusa Core One and a MK3.5. Us the on the Core ONe to do oversized prints and it works great. Adhesion is very very good, almost better than you'd want, but you won't have to worry about a print popping off the build plate after that first layer. TIP: do yourself a favor while you're waiting to get this steel sheet delivered. Go to an auto parts store (Autozone for me) and get a plastic scraper that has the changeable plastic "razor blades" in it. Mine is grey with orange blades and my older one is blue with orange blades. They'll be in the aisle with the sealants and adhesives and fasteners or just get it on Amazon. Search for "plastic razor blade scraper" and there are a blue million hits.

I’m really impressed with this plate on my A1 Mini. Adhesion is excellent, and I haven’t had a single print fail due to bed issues since switching to it. The surface grips well, especially with PETG — almost too well at times. For PETG, I usually need to warm the bed slightly after the print finishes to help it release cleanly. The plate stays flat, heats evenly, and gives consistent results across multiple materials. For the price and performance, it’s one of the best upgrades I’ve made to the A1 Mini.

Excellent Build plate, Great balance between plate adhesion as well as removability. I exclusively use the crygrop build plate now because I also enjoy the satin surface finish it gives my prints. I ordered 8 BIQU plates from them, I did have to have 2 of them replaced as the quality of them was not up to par and the prints would not stick despite through cleaning with soap and water. The replacement that was sent was great and worked as advertized.

This build plate makes a world of difference. I've had no problems with sticking with any types of filaments. It is a thick plates, very durable, you can tell it looks like a quality plate but you are paying a good price for it, it fits perfectly on the x1c.

This is a perfect fit for my p1s. I got it on sale so it was well worth the money. I will be using it as my daily driver plate for the foreseeable future. I love the pretty color and plan on getting more in different colors. I do like the larger lip to grab it by to remove and replace. It seems to maintain an even heat throughout. The big plus for me is the grip which my understanding the frostbite is even better for pla/petg. This is plenty sticky for me with the plus of a smoother texture. Would repurchase. Had to take a star away after using about three times the coating started to flake. I did remove after plate cooled and this still happened. So far still adhearing well but disappointed nonetheless