X-884 Pressure Wash Gun Kit

This Spray Gun is well made and works great! And as a bonus all the extras, the foam cannon, the wash mit, and the assortment of spray nozzles are all good quality..

Bought just for the pistol handle. Everything else is fine, it works, comes with quick connect adaptors which is nice. Basic foam cannon bottle nothing fancy, adjustments work and sprays consistent foam. Good value just for the pistol handle alone.

Works well so far.

Un excelente producto lo recomiendo.

I am impressed! No more bucket and brush. Get all the soap on at once. Used Rain X high foaming concentrate ($8 bucks for a big jug) diluted about 1 soap to 10 parts water. First get the car wet and get as much of the dirt rinsed off with the yellow pressure tip.. Then plug in the foam attachement and adjust to get the foam consistency you want. Expect to use a whole bottle of your diluted mix on the car. Love the pistol grip vs the traditional wand for ease of use - much more control! Then use the supplied wash mit to scrub your vehicle. Then switch back to the yellow tip and rinse. Be careful not to get too close to your paint using the yellow tip, but for wheels and tires close is not a problem…or you can just use a less aggressive spray tip like the white one. NEVER use the red tip on a car! Last, for those who may not know…try to do this in the shade on cool paint. You do not want to let the soap dry on the vehicle before you can rinse it off.. Other wise just wash half and half or sections at a time and rinse.

In less than 8 months both the pressure washer gun and the foam cannon have failed. The trigger of the gun broke making it unuseable. The quick-connect fitting on the foam cannon has several issues. First, the o'ring will not stay in place. It extrudes out of the fitting and leaks. Also, the threaded brass insert in the back of the foam cannon into which the quick-connect fiting threads, spins in the plastic housing while trying to tighten the fitting. Very poor design and quality. Would no purchase again.

This is a great attachment for your pressure washer. I used it to pressure wash my house and was able to reach the top of my 2 story home with the siding cleaner easily. I also used it to wash our cars and was done washing them in a few minutes. It mixes soap / cleaner well and you can control spray from a stream to a fanned out spray. It's a great little gadget.

You get a nice bundle of stuff for the money and I will start by saying the bottle and gun are more convenient than what you’d normally get with your pressure washer, as far as washing a smaller car. However, there are some issues worth noting. First the O-rings my gun came with had already broken during my second use with the product. Luckily my pressure washer came with additional rings but now one of them is used for this gun. The nut that attaches the quick attachment for your nozzles as well as the nut near the hose connector on the bottom of the gun constantly come loose. These will need more than a hand tightening which I don’t think is acceptable for a fresh out of box product that has only seen two light uses. Another issue I found is that anytime I disconnect my hose it wants to take that bottom connector with it instead of just unscrewing from my gun, leaving the connector attached. I think if I take a wrench and disconnect it from the hose end and reattach and re-tighten everything on the gun correctly it will all, hopefully, be settled. The trigger lock also broke off and is now floppy and loose when reattached. The foam cannon adjuster is also backwards, I found that twisting it to the “less soap” is what gives you the most soap. I found this somewhat humorous considering I had it maxed out (or so I thought at the time) and notice it was barely shooting any soap out and I never thought to try turning it the opposite direction until I had literally checked everything else that could have been wrong. The nozzle adjustments are also either a jet stream or a massive “spray everywhere” setting with little to no adjustments in between. If you want a spray thats not a jet stream or a massive wedge, you have to very carefully adjust the nozzle and just watch how it comes out and hope you don’t turn it a tad more than it needs to be. When it all works, it works well but that’s WHEN. It all feels cheap but then again the entire thing is fairly cheap all things considered. The nozzles and mitt are the most solidly put together parts of this package of which I have yet to have any trouble with. All in all I’d say it’s better than buying an overpriced foam cannon with a Chemical Guys label slapped on to it. Everything bundled together is nice and convenient and the extra nozzles are a great deal. Just be sure to have some Teflon tape handy to keep any threads from possibly leaking, have some extra o-rings handy and have a wrench on hand, luckily all potentially needed fixing is cheap and/or free. It just shouldn’t be needed regardless.