Gratkit High Strength Resin, Excellent Mechanical Properties and Superior Stability, 405nm UV Resin for LCD/DLP 3D Printers,1000g, Black

works great. good price

Just getting started with resin printers and a Creality Halot R6. First prints I made were 3 battlemechs for battletech at 32mm scale. Couldn't get these models to print without issues on my Bambu A1 (even at quality settings and an 0.2mm nozzel). They came out perfect. Tossed them into a tuperware container with water and shook it for a bit let em sit for a couple min while I did cleanup and pulled them. Clipped the supports. It produced sturdy models, only one issue where I broke off a gun barrel because I grabbed the supports and just pulled. But even then, I was surprised the entire mini didn't come apart. The mini popped free and I super glued the gun back on. Tossed em under a double sided resin nail curing lamp (20 bucks) on a clear tray and they came out flawless down to some pretty sturdy antennas. No complaints.

Works as should

I bought this resin for use on my tabletop minis. Some of my models have thinner more brittle portions and the resin did a good job when models went through my drop testing. There is SOME flex which is good, and shown in the video. But I think it's main benefit isn't necessarily flexibility but rather it's strength. It did not have any issue dropping the model from desk height, where some of my other resins would snap or break. Again, there is some flex but this resin is for a different purpose I believe. The models came out strong and consistent between prints. And the push fit models attached easily, so I am happy with how accurate the dimensions came out. As with all dark colored resin, slightly longer exposure times help it cure properly. It needs the extra time to let the light bleed through. Overall a good resin. I would assume the accuracy and strength would lend itself well to engineering purposes but I have not tested it myself as I am mostly a tabletop printer

I was experimenting with parts of a new design. I found it will hold dimensional accuracy once you get your settings dialed in. The odor is minimal. I still washed it in 99% IPA. Curing time was longer due to the dark color and the hollows inside. Have to keep your room temperature elevated, noticed it getting thick overnight when heat was turned back. Overall I thought is worked well. I will be trying other black resins and may come back to make additions.

I tried so many settings, two bottles and I got a handful of models to print, the rest was fault after failure. Never had a problem with any other reason but this glow in the dark resin refused to print without extremely heavy supports and a nearly empty build plate

I use the same print settings I use for conjure rigid, and I’ve had a successful print every time. This stuff is actually really good. I’d like to try their black. Black resin seems the hardest to print.

I did several exposure tests trying to zero in this resin with my printer (Elegoo Saturn 4 Ultra) but could never get consistent results. One print would look perfectly fine and I'd print it again with the same settings and it suddenly delaminated and stuck to the vat. I found my most consistent results happened when I ended up over exposing the layers, but even then I would find parts of the print didn't form correctly. Out of the first 8 actual prints I attempted only 1 got me acceptable results. It may just be I had bad luck or my skills are not quite on par to tackle this resin, but when following the directions provided yielded no results, its very disappointing. I even replaced my FEP to make sure it wasn't worn out from pervious prints. My best results were around 30 Seconds Base Exposure and 5.5 seconds layer exposures. For the prints that did work those, they did indeed glow fairly well in the dark. Just not happy with what I managed to produce in the end as I ended up wasting most of the resin just trying to figure out what settings it worked well with.

Resina de alta calidad y muy fácil de usar usada en mi Elegoo Saturn 3 12K logrando así sacar unos resultados con aún mas calidad que una resina standar ya que es una resina de calidad 8k, tiene bastante dureza a la vez que una buena flexibilidad, comparable a resina ABS, no he tenido ningún problema a usar mi configuración básica sin modificar ningún parámetro, punto positivo a mi gusto es la forma del bote, que la hace genial para manipularla y guardarla (comparado con los botes redondos tan grandes de otras marcas), en su caja incluye un par de guantes para su utilización y un folleto explicativo de sus diferentes gamas y sus características, muy recomendable tanto para gente experimentada como para gente qué acabe de comenzar.

👍🏼 Impresiones de calidad, claras y mucho detalle, fácil curado y, con los parámetros mínimos sugeridos, cero complicaciones. 👍🏼 El olor, algo que siempre echa para atrás, en esta marca apenas huele, un leve olor nada desagradable. Por eso es más importante que nunca que seamos conscientes de usarla con la correcta ventilación/filtración para minimizar posibles peligros. No olvidemos que son resinas químicas y siempre hay que tomar las debidas precauciones. 👍🏼 De mis impresoras, esta vez he usado la Elegoo Mars 2 Pro, y los parámetros de impresión en Chitubox... a 2.5 seg. por capa y el resultado es perfecto como se ve en las fotos. 👍🏼 No hace falta usar productos como el alcohol isopropílico para su limpieza, con agua se limpia perfectamente. 👍🏼 El precio está dentro de lo razonable para una resina no específica y con un resultado magnífico... tras el curado guardó perfectamente el tamaño encajando perfectamente para lo que fue diseñada. Conclusión, una resina de calidad a tener en cuenta. Cumple perfectamente con mis expectativas. P.D .: Mis evaluaciones se llevan a cabo de forma coherente de acuerdo con el siguiente esquema: ⭐️☁️☁️☁️☁️ 1 estrella - Absolutamente inutilizable | Precio totalmente excesivo | Lejos de cumplir mis expectativas ⭐️⭐️☁️☁️☁️ 2 estrellas - No me gusta o no me convence| Precio bastante alto | Mis expectativas solo se cumplen parcialmente ⭐️⭐️⭐️☁️☁️ 3 estrellas - Bien | cumple con mis expectativas | Precio alto ⭐️⭐️⭐️⭐️☁️ 4 estrellas - Muy bueno | supera mis expectativas ⭐️⭐️⭐️⭐️⭐️ 5 estrellas - Me inspira | me sorprende positivamente | Supera con creces mis expectativas ↘️⬇️⬇️⬇️⬇️↙️ Espero que mi opinión te resultara útil.

I printed a whole bottle’s worth of dnd monsters and characters, they all turned out well and the glow was as good as you can expect. The photos were taken in total darkness after I shon a 1000 limit flashlight on them for about a minute. They didn’t appear that bright in person, my phone camera did some sort of low light magic to make them pop. They do glow as good as any generic dollar store glow in the dark toy, and the resin prints quite well on default settings on my anycubic photon mono 2, but there is more clean up, and I would replace my FEP 2x as often as you normally would.

Good stuff, does exactly what it says it’ll do. A bottle this size should keep you going for ages

Debutant en impression résine, j'avoue pas d'odeur, mais comme lu un peu partout fragile a la pression. Pour le reste cela est très zolie sur le modèle fournie par elegoo