ATGHeavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool

This is a review worth reading if you need a pistol sight pusher.I have 2 other highly rated sight pushers. One $100+. Changed out enough stock sights that I refused to bang on them with a hammer & delrin anymore. Upgrading to tritium night sights? You don’t want to bang in this with a hammer. Can cause permanent damage. Hammering in place not a very accurate way either. My other sight tools work ok but both have issues & some slides won’t fit quite right. If you’ve used a sight tool before you know proper holding of the slide makes a big difference.So this ATG is very well made. Good fit and finish. Seems well thought through. Example: doesn’t just hold slide from sides. Nice round screw plate on bottom so you can adjust to the height of your slide. About a 3” round plate big enough to give great bottom support. The sides screw in to hold slide. Delrin inserts so no steel contacting your slide. Holds sides very firm. The Felton inserts are not perfectly flat, so will work on slides other than perfectly flat Glock slides. Then they go a step further and provide a 4th plane of support with a top screw (also with delrin insert) that adjusts down on top of your slide. Last the heavy duty steel pusher when properly aligned will move the tightest site. You carefully set this bad boy up and it will remove and reinstall your sights. I’ve used it now on Glocks, 1911’s, CZ75 & a SIG micro 9. Worked well on all. Probably some slide out there that won’t fit, but it would be a 1%-er. I don’t think you’ll be disappointed.PS: no instructions included but intuitive setup. If your buying a sight pusher you’ll figure it out. By the way it comes with a nice zippered case with urethane foam cutout to fit tool. Extra delrin protection inserts. They’ve though of almost everything. For $60 you can’t go wrong.

Great quality, works perfect

I've owned this 5 years now and it continues to work well on my Glock pistols. It works even with very tight fitting sights like Heine Straight 8 sights. For what this cost it pays for itself the first time you use it since you don't have to pay a gunsmith. Every use afterwards you are essentially paying yourself!

I used this first on my Smith & Wesson Performance Center Shield Plus. The rear sight was very tight. I did not place the device in a vice, as I don't have one. The rear sight was so tight I could not get the sight to move by just turning the devices turn bar. It was just to tight. Yes I removed the set screw all the way out. Yes the devices height was set above the slide. However the sight mover turn nut is hexagon, so I was able to grab it with some channel locks. It was still slow but it did move the sight. The plastic inserts worked fine and the guns slide was not marked. The turn nut was marred a bit but not damaged.I then used the device on my 1911 Commander and this sight was able to move using all most no force at all. Put the set screw back in and worked fine.This does not come with instructions, but there are videos on You Tube. It's pretty straight forward, but I would watch the video anyway, just takes a few minutes to review.I would recommend.

Could not get the rear site on my Hellcat to budge. With the help of this tool I was able to get it to break free. This tool worked perfectly! I did have to take my optic off, but I believe that is the way it is intended to work.Looks to be very well made. No plastic.

The ATG Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool is an essential tool for anyone who works with firearms! This pusher tool makes the process of installing or adjusting dovetailed rear sights incredibly easy and precise, eliminating the frustration that often comes with sight adjustments.What I appreciate most about this tool is its robust construction. Made from high-quality materials, it feels solid and durable, designed to withstand the rigors of regular use. The heavy-duty design ensures stability during operation, allowing for precise adjustments without the risk of damaging the sight or the firearm.The versatility of the tool is impressive. It accommodates a wide range of pistol models, making it a valuable addition to my gunsmithing kit. The adjustable features allow me to align and install sights accurately, which is crucial for achieving optimal shooting performance.Using the ATG sight pusher is straightforward, thanks to its user-friendly design. The clear instructions make it easy to get started, even for those who may be new to gunsmithing. I’ve successfully adjusted my sights with minimal effort, which has saved me both time and money compared to taking my firearms to a professional.Overall, I highly recommend the ATG Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool for anyone looking for a reliable and efficient solution for sight adjustments. Its combination of quality, versatility, and ease of use makes it an invaluable tool for both enthusiasts and professionals alike!

Works greaton a 3rd gen glock 26, 27, 19, 17, 22, 34, 35 and others

I wanted to love this kit but sadly everything outside of the vice is subpar. My biggest gripe was the front sight removal tool had burs from the manufacturer and powder finish to the point it was unusable. After filing it down a little and removing the coat I was able to make it work. The sight pusher itself works great to remove suppressor iron sights off my Glock 19X and install Ameriglo replacement effortlessly in minutes. No damage to slide or anything. I feel like the sight pusher has a great value but you can skip the rest of this tool kit and get higher grade tools without having to modify them like I did. Everything was sealed with no signs of wear so I truly believe this was on the manufacturer.