BETCKEY - Compatible DYMO 30334 (2-1/4" x 1-1/4") Multipurpose Barcode Labels, Perforated, Compatible with DYMO Labelwriter 450, 4XL, NOT Fit 550 & 5XL [16 Rolls/16000 Labels]

Labels are great.With 1,000 labels it's easy to loose track of where you are on the roll. The last few labels really aren't printable. When the roll reaches the end, and I haven't figured out if the paper backing is actually attached to the roll or just what causes the issue, but the DYMO tries to pull the paper down to print on the next label, only it cannot because it's at the end of the roll. So far all 3 rolls we've used have managed to do this even when we were paying attention and the print should have had one lable left on the roll not printed on. Then the labels peel off the paper backing, and wrap itself around the rubber roller. Until you manage to get the label off the rubber roller, and remove all the adhesive, printing again is not possible. Yet you can take the machine apart and remove the paper jam, yet still have problems because the label is around the rubber roller. It's not a paper jam, and it's looks free of any paper, unless you remove the front of the machine nothing looks amiss.Leaving at least 5 labels will prevent this, as there were 5 when I checked and printed either 3 or 4 additional labels the last time and the same problem occurred. May just continue to pay attention and leave 5 each time. Better than last 5 getting toasted, and then first dozen on next roll.

Labels work great with my old dymo printer. I have a new one, that Dymo changed recently to have only their branded labels work with the new printer.But works great for me.Also the best news are, that I can print 1,000 at one time and never run short, in fact have about 20 extra.Not like with other labels, and I bought them a lot from other sellers, I had to print 900..then 50....and only a few extra ....that was waste of time.I love the labels and they stick good enough but if you need to remove, you will not damage the original label, which is a requirement from Amazon.PensAndLeather Store

We've been using these labels for years. The ends of the roll used to have major issues, and you either had to print short and change the roll before it ran out, or you had to be ready to grab the labels when you hit the end and hold on so they didn't get sucked back in. That error has been fixed with new batches, which is fantastic.But now the rolls aren't 1000 labels. I put in a new roll and printed 986 labels, but the roll ran out before all the labels printed?!! I've run about 15 rolls this week, and found the rolls have approximately 964 labels per roll.Why are they advertised as 1000/roll when there are only 964/roll?

Great Product!

Purchased these labels for a production run we did for several of our products. We create bar codes in batches of 1,000 per sku so naturally we run 1,000 labels at a time (999 labels + 1 label since that is what Dymo allows). However, the first roll of labels the printer was out of labels at 949 labels (51 labels short of 1,000). The next 8 rolls we printed the machine ran out of labels at 964 labels. This is frustrating because not only are we not receiving the amount of labels we paid for, but it makes everything more complicated for us since we label everything by the 1,000. We double checked this was accurate by having the print screen open and then using one of the rolls to label products and sure enough there were always 964 or less labels per roll.The quality of the labels is good, I just wish they would put 1,000 per roll like stated.

I got these for product tags for our Dymo 450 Turbo and they work quite well. Amazon actually delivered our first order to the wrong address (totally Amazons fault) but I was able to get it resolved with Seller very quickly and get my order.We've already used a couple of rolls already and will definitely be buying more when we are out!

Been using this for over a year and it works.

These labels are great! They fit and work perfectly with our Dymo printer. The stickers are very nice and have a strong adhesive which allows them to stick and stay in place.Each label is individually packaged allowing for easy storage for the other rolls.We would recommend these to a friend and will be re-ordering in the future.

this company has excellent response time. I have bought numerous labels. From them and have been, for the most part, pretty satisfied. The thickness and label adhesive can be a bit problematic at times, but they haven’t bricked a Labeler on me yet. (fingers crossed).

I love these labels. There is only one small problem, when the roll runs out the last label gets jammed into printer roller. Then I have to take printer apart, to remove that last label. Sometimes it can take 5 mins to remedy this.

We use a lot of these labels, and always order from BetcKey. These are compatible Dymo labels, and work just as well as the name brand for a fraction of the cost. Great product!

Used to be good but now causes a massive jam each time the roll ends. The last label is used as adhesive to stick to the cardboard roll but when the last label comes off it jams around the printer head due to the adhesive. The backing paper/release liner need to be extended. Almost completely damaged my labeler, took me hours to fix it.

Good Quality