MPCComplete 2-Way LCD Remote Start Kit with Keyless Entry for 2004-2010 Toyota Sienna - Firmware Preloaded

Edity. 06 sienna use the relay!This is basically a bundle kit with links to wire chart and tip sheet specific to your vehicle, in this case 06 toyota sienna. I have installed a few before this was my first to use bypass and factory key fob. Going straight off the tip sheet worked but it referenced wire sheet that did not agree. Like see note 4 but there is no note 4, and one page says use this wire and the other says don't use this wire. I sent seller a question about it and they sent me a link to someone else wire chart after a few days. So that's a little disappointing. Something completely left out but important is do not connect the green activation wire on the red 3 plug to the blue/red until after you program the options! Also there is a red/blue and blue/red next to each other, I used a tap for that wire and solder on most others. I also changed a program option to leave driver door unlocked after start, it unlocks to deactivate security then default is lock back up. Also important is key fob does Not work with engine running, so no shut down or unlock or open back or sliding once remote started. If you want that it is possible from aftermarket key fob and way more wireing. This was I think 14 wire connections which is not bad at all.

Tech support was very good. If I wasn't for there support I would have not been able to install. I have never installed one before and would not have been able to without the tech support.

This is not a plug in and you're ready to go kit. However, the downloaded instructions are specific to your vehicle and are very clear with pictures. I did have some question about some additional features, I received prompt reply from support, I also received prompt reply to additional questions. Works perfectly.

Good vehicle specific instructions available for download. They tell you exactly what wire, location and what pin number it is. If you need more help, the12volt.com had pictures too. It took me a little while to install because I unpinned almost every connection and soldered and used heat shrink. Programming options was very simple. Works perfectly Everytime and I like that it uses my original key fob.

System installed with no issues in my wife's 2006 Sienna. Instructions were great and straight forward.

That was easy to install for me and now I can start my car with the remote control but - the description is not saying that - there is no way to open the door with my key fob and even shut off the motor! I was trying to turn it off by pushing the brake pedal, I was trying to shut it by the ignition switch, nothing was able to shut off! I've stop my motor when I pulled the positive fuse! First time in my life I've meet that kind a stupid interface. Don't waist your time on it! Highly not recommend it.

Quality product but seriously difficult to install

Installed on my 07 sienna. It looks scary in the box, but the instructions are clear and step by step. I got it all done and working great. Initially had a connection issue with a T-tap, but found the problem and it is working great! Wish I had done it earlier. Using the factory key fob is working great.