VEVOR Sta 8 X 8 Inch 88LB Aluminum Oxide Lifting Platform Heavy Duty Laboratory Scissor Lab Jack Stand 8x8 Inch

This is perfect for lifting a garbage disposal. So you don't have to struggle holding up it and turning the bracket. Worked great. Very well made.

You need to know that this stand is robust and stable even at maximum height. Reviews that complained about stability either are wrong or got a different product. I use it for woodworking to support the end of long pieces of wood that my power tools don't support, like a drill press.

First off, this was well assembled at the factory, as there was no play in the platform and no wobble. To say it is a solid platform is quite the understatement. It's very well made, and I wouldn't hesitate to use it to support my expensive distillation apparatus, or anything else for that matter.The one thing that you need to watch out for, and which the manufacturer SHOULD ADDRESS - ahem - is how wickedly sharp the edges of this thing can be. Folks, if you're not careful, this WILL cut you.When they cut these from extruded blanks to be machined and coated, they also need to take a sanding wheel and knock down the sharp edges. VEVOR, I'm talking to you. They're so sharp they can be dangerous, so please, PLEASE be careful with this, and don't let it slip through your fingers or you'll be hunting for a band-aid.I took a star off only for the sharp edges that should be dressed from the factory. Don't send things out that can hurt people negligently, folks. It's not THAT much work to finish these properly. Beyond that, this is actually a beautiful stand that is well built, wobble free, and rock solid. Maybe check it out if you need to get some altitude for your apparatus.

Works great...

Terrible product did not work for what I needed it for didn’t bother to take it completely out of the package sent it back the next day.

You get what you pay for. Works fine it's just really not quality

I use this as a base for my heating mantle with stirring. I was very impressed that there was no tilt to the stand as so many at this size will wobble or lean to the left or right when weight is placed on them. No issues with this one being raised or lowered, did not have to adjust when raising back up to apply more heat. Love the stand....Not a fan of Vevor customer service, ONLY BUY THROUGH AMAZON!!! Direct sales with the company is not advised. I have had HORRIBLE Customer Service issues, that were never resolved after 4 months of waiting. (And it will never be resolved. Reported to the SEC as they would not support their warranty.)

I used this to install floating rails in a cabinet. I needed something that was sturdy, flat, and could hold rails for a drawer in position while I was screwing into the cabinet. There is SOME sharpness to the edge but only in a few spots. Nothing that a piece of sandpaper can't resolve. I purchased this model over others for two reasons: 1, I liked that it extended 12", and 2, I liked that it had rubber feet to keep from sliding, Overall this was perfect and has a whole other set of uses than just for industrial or lab purposes.